Powders & Pastes For Vibratory Finishing

Range of powders and pastes used for grinding, cleaning and polishing of ferrous and non-ferrous materials for vibratory and high energy finishing machines.

Excellent - Good - Average -

Category Material Name
Abrasive Compounds Polishing Compounds
Abr0 Abr1 Abr2 Abr3 Abr7 35F Pol6
Powder compound details Description An aggressive, coarse, concentrated, abrasive compound, used on harder metals for grinding, radiusing and the removal of heavy machine marks and burrs. Used with an abrasive media. It leaves the surface of components with a shotblast appearance. It is a fast cutting compound for heavy deburring and combined with cleaning agents and is mainly used for ferrous components, brass cuttings and pressings. It leaves the surface with a matte finish. It is a medium abrasive compound and is combined with cleaning agents. It is a light deburring compound combined with cleaning agents for fine surface finishing of all materials, but mainly used on soft metals like zinc, brass or aluminium. It can also be used to bring back the surface on ceramic media which is contaminated. It is a light grinding compound for cutting down and polishing and contains an extremely fine abrasive, which during the process breaks down into a slurry. This assists the polishing ingredients to impart a polished surface. This is used for cutting and polishing of non-ferrous metals and contains a soft abrasive with polishing agents. It is used for polishing copper and its alloys with non abrasive media. A silky foam lather is built which enhances the polishing process.
PH 9-10 11-12 11-12 10-11 9-10 5-6 9-10
Colour Dark Brown White/Brown White/Light Brown White Dark Brown Off White White
Application guide and characteristics Brightening/Polishing
Ball Burnishing            
Cleaning  
Corrosion Inhibitor      
Degreasing/ De-oiling              
Descaling /Derusting / Light Heat Treatment      
Foam
Ferrous Material Carbon Steel      
Hardened Steel      
Iron        
Stainless Steel        
Non-ferrous Material Aluminium          
Brass      
Ceramic            
Copper          
Magnesium            
Plastic            
Titanium            
Zinc            
All Metals All Metals        
Category Material Name
Polishing Compounds Cleaning and Degreasing Compounds
Pol51 Pol71 Cle1 Cle4 Cle5 Cle6 KemAC BT (Cle7) Cle50
Powder compound details Description A polishing compound for aluminium with extra brightening and polishing agents giving superb results. Mainly used with steel media or plastic media to give a semi-polished matte finish. It produce a clean, bright luster and keeps the metal in solution, allowing the process to continue for long periods. This is suitable for Zinc and Zinc Alloys. Mainly used with non-abrasive media. Used to remove grease, oils and lubricating fluids, leaving metal components clean and ready for further processes. Used for cleaning of ferrous components and can be used with all types of media. It keeps processes free of grease and oil. Good rust inhibitor. Mainly used on ferrous components. Cleaning compound with brightening. Used on ferrous components to give a clean, bright surface finish. It contains a strong rust inhibitor. Abrasive and polishing media can be used with C6 compound. Used mainly on ferrous components to give a clean surface finish. It contains strong rust inhibitor. Suitable for processing all metals. Copes with all types of oily and greasy components. Contains corrosion inhibitor and can be used with all types of media.
PH 9-10 9-10 12-13 12-13 12-13 11-12 11-12 10-11
Colour White White White White White White White White
Application guide and characteristics Brightening/Polishing      
Ball Burnishing              
Cleaning
Corrosion Inhibitor        
Degreasing/ De-oiling        
Descaling /Derusting / Light Heat Treatment            
Foam
Ferrous Material Carbon Steel      
Hardened Steel      
Iron      
Stainless Steel      
Non-ferrous Material Aluminium            
Brass            
Ceramic                
Copper                
Magnesium                
Plastic                
Titanium                
Zinc              
All Metals All Metals        

Special Compounds

Category Material Name
KemTC KemCC KemAG KemVP
Special compound details Description A near neutral material to give a safe process for the rapid removal of metal on ferrous components. Ideally suited for steel and hardened steels in the hand tool industries. After the Turbocut process, the surface is ultra smooth and can be plated directly, eliminating expensive hand polishing. Removal of grinding, linishing and machine marks. Recommended for steel, hardened steel and certain stainless steels only to give rapid metal cut-down and levelling, producing super smooth surfaces, ready for polishing and elector-plating if required. Mainly used with non-abrasive media. This is an abrasive paste that is used in Vibratory bowl machines and it is used for both ferrous and non-ferrous parts This is a polishing paste and can be used on all metals.
PH 6-7 1-2 6-7 8.5
State Liquid Powder Paste Paste
Colour Clear/pale White Brown White
Application guide and characteristics Brightening/Polishing    
Removal of machining/ grinding lines  
Cleaning    
Corrosion Inhibitor      
Degreasing/ De-oiling        
Descaling /Derusting / Light Heat Treatment    
Foam        
Ferrous Material Carbon Steel    
Hardened Steel    
Iron    
Stainless Steel    
Non-ferrous Material Aluminium        
Brass        
Ceramic        
Copper        
Magnesium        
Plastic        
Titanium        
Zinc        
All Metals All Metals    
Category Material Name
KemAD1 KemVS KemAP 108 KemAP 106 Separating Compound
Special compound details Description It is used for descaling and rust removal of oxides, heat treatment, discolouration, welding scale, some carbon deposits, hard- water scale. Not used on zinc or magnesium. For use in vibratory beds with crushed walnut shell media for bright polishing of small ferrous and non-ferrous items It is a fine long lasting clean cutting abrasive for normal burr and surface finish improvement. It prevents corrossion on ferrous parts and produces a clean smooth finish on all metal parts. This is used with ceramic, natural or soft metallic media. This is an abrasive compound for normal deburring and stock removal. It can be used with ceramic, natural or soft metallic medias, and is excellent for part-on-part processing. This produces a clean smooth finish on all metal parts. This is used to keep flat parts from sticking to each other when wet in a process. It is used in all types of vibratory and barrel finishing machines with all metals.
PH <1.5 6-7 9.3 9.0  
State Powder Paste Powder Powder Granules like Beads
Colour White/Off White White Off White Off White White
Application guide and characteristics Brightening/Polishing        
Removal of machining/ grinding lines      
Cleaning      
Corrosion Inhibitor      
Degreasing/ De-oiling        
Descaling /Derusting / Light Heat Treatment        
Foam         N/A
Ferrous Material Carbon Steel        
Hardened Steel        
Iron        
Stainless Steel        
Non-ferrous Material Aluminium        
Brass        
Ceramic        
Copper        
Magnesium          
Plastic        
Titanium        
Zinc          
All Metals All Metals