Which ultrasonic cleaning fluid to use?

For removal of Polishing compounds, soluble oil and light pollutions with Ultrasonic Cleaning

GALVEX SU 737 is a mild alkaline solution that is suitable for cleaning metals such as steel, silver, brass, titanium, and zamak. This solution is an excellent emulsifier and solubilizer of greasy substances. It leaves a temporary film that protects the surface from oxidation and provides a hydrophobic surface that facilitates drying.

GALVEX 20.01 is designed for use on stainless steel, titanium, copper alloys, aluminium, precious metals, and silver. It is suitable for the medical sector and can be used as a finishing product. It leaves a hydrophilic surface that can be used in surface preparation prior to passivation.

GALVEX 20.02 can be used on all metals except carbides. It is a mild alkaline solution that contains no harmful components. It has high efficiency on brushed, satin, and stippled parts with complex geometry. It increases wettability and is easily rinsed off. It can also be used as a finishing product.

RODACLEAN 2018 is a strong alkaline solution designed for use on titanium, ceramics, steels, and stainless steels. It contains no harmful components and is suitable for the medical sector. It can be used in surface preparation prior to passivation.

VACUKLEEN 2018 is a strong alkaline solution designed for use on titanium, ceramics, steel/stainless steel, carbides, and hard metals. It is an excellent solution for preparing surfaces prior to vacuum metallization (P.V.D). It does not attack cobalt and has excellent wetting properties. It can also favourably substitute solvents.

For removal of Polishing compounds, soluble oil, light pollutions with Ultrasonic Cleaning

DECOSPRAY TM, is a mild alkaline solution suitable for cleaning all metals except carbides and synthetic materials. It is a non-foaming product and can be used in spray or ultrasonic cleaning. However, it requires an oil separator for proper disposal.

VACUKLEEN 440, is a strong alkaline solution used for cleaning titanium, steels, stainless steels, carbides, precious metals, and plastic materials. It is an effective substitute for solvents and can be used in pre-degreasing. It is also suitable for surface preparation before P.V.D. treatment. However, it requires an oil separator for proper disposal and does not attack cobalt.

DECOCLEAN 440, is a strong alkaline solution that is suitable for cleaning steel, stainless steels, and ceramics. It can also be used for pre-degreasing and is a non-foaming product. However, it requires an oil separator for proper disposal.

For removal of Anticorrosion additive

KORROSTOP 5000 is a biodegradable, alkaline anticorrosion additive used in the final rinsing bath with demineralised water. This additive provides excellent corrosion protection and is environmentally friendly. Its biodegradability makes it safe for disposal, reducing environmental pollution.

KORROSTOP 5000 is typically used as an additive in the final rinsing bath after the cleaning and pretreatment processes. It is effective in preventing the formation of rust and other forms of corrosion on metal surfaces. The product can be used with all types of metals, making it a versatile solution for various industries.

For removal of Deoxidation, brightening effect

RODASTEL 30 is an acidic, deoxidation, and brightening additive suitable for all metals. It is primarily used for the neutralisation and activation of surfaces before the P.V.D. (Physical Vapour Deposition) process. The acidic nature of RODASTEL 30 makes it an excellent solution for removing oxide layers on metal surfaces.

RODASTEL 30 is primarily used for the neutralisation and activation of surfaces before the P.V.D. process. The deoxidation and brightening effects of this additive help to improve the adhesion of coatings and reduce the risk of defects, such as blisters or peeling. It is also effective in removing oxide layers from metal surfaces, ensuring proper activation before the P.V.D. process.

For removal of Setters cement, wax, glue

ALLSTRIP is a solvent-based additive suitable for use with all metals, including galvanised metal. It is a versatile solution for the removal of setters cement, wax, and glue from metal surfaces. This product does not contain NEP (Nonylphenol Ethoxylate), making it an excellent alternative to acetone. It is safe to use in ultrasonic cleaning or vacuum systems.

ALLSTRIP is primarily used for the removal of setters cement, wax, and glue from metal surfaces. Its solvent-based nature makes it effective in dissolving these substances, making it easy to remove them from metal surfaces. The product's lack of NEP makes it an excellent alternative to acetone, which is a highly flammable substance. It is safe to use in ultrasonic cleaning or vacuum systems, making it a versatile solution for various industries.

Cleaning aluminium or stainless steel plastic injection moulds

Recommended cleaning and drying process (for a high quality finish)

cleaning plastic injection moulds
1 2 3 * 4 5 6
RODASTEL 2010 Tap water rinse ACID CLEANER No3 Tap water rinse DI water rinse Air drying
Conc: 50-150 g/l
Temp: 50-65°C
Time: 2-3 min
Conc: 5-10%
Temp: 20-30°C
Time: 1-5 min

* Neutralisation needed

Removing grinding compounds from steel and stainless steel

Recommended cleaning and drying process (for a high quality finish)

Grinding Compound Removal from steel
Conditioning Finishing
1 2 3 * 4 5 6
ACID CLEANER No3 Tap water rinse GALVEX 17:30 N Tap water rinse Cascade Hot air drying
Conc: 3-5%
Temp: 30-40°C
Time: 2-3 min
Conc: 2%
Temp: 50°C
Time: 2-3 min
Demi water Demi water

* Temporary film on steel

Removing oils from all metals (for precision mechanical parts)

Spot and tarnish free process for automatic plant

oil removal for all metals
1 * Cleaning Finishing
2 3 4 5 6 7
DECOSPRAY TM GALVEX 17:30 N GALVEX 17:30 N Tap water rinse Tap water rinse 2 mins Demi water with LIFT OUT Air drying
Conc: 5-10%
Temp: 60-70°C
Time: 3-4 min
Conc: 4%
Temp: 70°C
Time: 3-5 min
Conc: 2%
Temp: 70°C
Time: 3-5 min

* An oil separator is necessary for perfect results.
** Use NANOCLEAN 95 in case of large quantities of oil to eliminate without oil separator.

Removing oils from all metals (for micromechanicsm with blind holes)

Recommended cleaning and drying process (closed plant vacuum, continuous distillation)

Oil Removal Blind Holes and Micro Mechanics
Oil Removing
RUBIFIN No4
Conc: 100%
Temp: 30-50°C
Time: 3-10 min

Removing oils from circular saws

Recommended cleaning and drying process (prior to vacuum metalisation P.V.D))

Oil Removal Circular Saws Sensitive Steel
1 2 3 4 5 6 7 8
GALVEX 17:30 N GALVEX 17:30 N Tap water rinse 3 min Di water rinse 30" FINISH AID SUP.7 Di water rinse 2.6 μS 15" Di water rinse 0.2 μS 15" Hot air drying 80°C
Conc: 5%
Temp: 70°C
Time: 5 min
Conc: 2%
Temp: 60°C
Time: 3 min
Conc: 0.2%
Temp: 20°C *
Time: 90 min

* Make up the bath 'step 5' with demineralised water

Removing polishing compounds and oils from sensitive steel (20AP) in the watch and clock industry

Recommended cleaning and drying process (without any corrosion)

oil removal from sensitive steels
1 2 3 4 5 6 7 8
GALVEX 17:30 N GALVEX 17:30 N Tap water rinse 3 min GALVEX 17.89 SUPRA Di water rinse 30°C Di water rinse 0.2 μS 15" Di water rinse Hot air drying 80°C
Conc: 5%
Temp: 70°C
Time: 3-5 min
Conc: 4%
Temp: 65°C
Time: 3-5 min
Conc: 3%
Temp: 60°C
Time: 3-5 min

Removing polishing compounds from Brass, Zinc die casting, Aluminium and Silver in the watch and clock industry

Spot and tarnish free process for automatic plant

Polishing Compound Removal from Brass Aluminium silver
Cleaning Finishing
1 2 3 4 * 5 6 7
GALVEX 18:01 GALVEX 18:01 Tap water rinse 2 min SUPER HELIT IC Tap water rinse 2 min Demi water with LIFT OUT Air drying
Conc: 3-5%
Temp: 70°C
Time: 3-5 min
Conc: 2-4%
Temp: 70°C
Time: 3-5 min
Conc: 2-3%
Temp: 50-60°C
Time: 3-5 min

* Prepare solution with demi. water

Removing polishing compounds from Orthopaedic implants

Recommended cleaning and drying process (for a high quality finish)

Polishing Compound Removal From Orthopaedic Implants
Conditioning Finishing
1 2 3 4 * 5 6 7
GALVEX 18:01 GALVEX 18:01 Tap water rinse NGL 17.40 P.SP Tap water rinse Cascade Hot air drying
Conc: 3-5%
Temp: 70°C
Time: 2-3 min
Conc: 2-3%
Temp: 70°C
Time: 2-3 min
Conc: 20 g/l
Temp: 50°C
Time: 2-3 min
Demi water Demi water

* NGL 17.40 P.SP non pulverulent

Prior to solvent drying Electroplating for GLASS - METAL (with blind holes)

Recommended cleaning and drying process (for a high quality finish)

Prior to Solvent Drying after Electroplating For Glass and Metal with Blind Holes
Ultrasonic preparing bath for aqueous cleaning Tap water rinse Fluid T.G.V Drying - Finishing
Solvent Drying
Tempered Forane Satured vapour zone
Water Forane or Vertrel

Cleaning of Wafers

Recommended cleaning and drying process (for a high quality finish)

Wafer Cleaning Process
Conditioning Finishing
1 2 3 4 5 6 Hot air drying
GALVEX 17:30 SUP GALVEX 17:30 SUP SUPER HELIT IC Cascade
Conc: 5%
Temp: 50°C
Time: 5 min
Conc: 3%
Temp: 50°C
Time: 5 min
Tap water rinse Conc: 3%
Temp: 60°C
Time: 2-3 min
Tap water rinse Demi water Demi water
kemet ISO 9001

BSI number Q05919

Over 85 years of service to industry

Your subscription could not be saved. Please try again.
:)

Signup to receive our special offers

Cookies & Privacy Policy | Kemet International Ltd. Subsidiaries
© 2023 Kemet International Limited is a company registered in England and Wales with company number 344017. VAT number GB202934881.

Cookie Notice

This site uses cookies to ensure the best experience. By continuing to use this website, you agree to their use. Learn more about our privacy policy.